Parameter Sensitivity Study on Inflow Distortion of Boundary Layer Ingested Turbofans
Artikel i vetenskaplig tidskrift, 2022

The inflow distortion to the fan introduced by the ingestion of the fuselage boundary layer is the most critical challenge in realizing the benefits of boundary later ingesting (BLI) concepts. Minimizing the level of distortion while maintaining the desired amount of ingested boundary layer and free stream flow is crucial in minimizing the penalties to fan efficiency and noise emissions. In this paper, a parametric sensitivity study is performed to examine the integration of two semi-buried BLI turbofans at the rear end of a typical tube-and-wing body (TWB) fuselage. The key parameters influencing BLI, such as the nacelle installation positions, wing position, fuselage length, rear fuselage shape, intake shape and operating conditions were evaluated by computational fluid dynamics (CFD). Among the investigated parameters, increasing the nacelle spanwise installation spacing improved inflow distortion by reducing the diffusion separation, but this needs to be offset against the added weight and nacelle drag. A high wing position variant showed strong interference between the wing and the nacelle, which must be avoided as this significantly increases the complexity of the inflow distortion. A moderate angle of attack (AOA) variation did not affect the fan inflow distortion but there was a tendency for interference from the wing to increase when the AOA was increased. The general conclusions from this study will be useful in the conceptual design of a similar type of BLI configuration, as well as a more comprehensive optimization of this type of aircraft–engine integration.

Författare

Xin Zhao

Chalmers, Mekanik och maritima vetenskaper, Strömningslära

Philip van Hoorn

Chalmers, Mekanik och maritima vetenskaper, Strömningslära

Huadong Yao

Chalmers, Mekanik och maritima vetenskaper, Strömningslära

James Alderman

AIRCRAFT RESEARCH ASSOCIATION LIMITED

Aerospace

22264310 (eISSN)

Vol. 9 8 426

Supporting Understanding of Boundary Layer Ingesting Model Experiment (SUBLIME)

Europeiska kommissionen (EU) (EC/H2020/864803), 2019-12-01 -- 2022-11-30.

Strategiskt forskningsprojekt på Chalmers inom hydro- och aerodynamik

Stiftelsen Chalmers tekniska högskola, 2019-01-01 -- 2023-12-31.

Styrkeområden

Transport

Energi

Ämneskategorier

Rymd- och flygteknik

Beräkningsmatematik

Strömningsmekanik och akustik

Infrastruktur

C3SE (Chalmers Centre for Computational Science and Engineering)

DOI

10.3390/aerospace9080426

Mer information

Senast uppdaterat

2022-09-29