High-speed high-efficient grinding of CMCs with structured grinding wheels
Artikel i vetenskaplig tidskrift, 2019

The implantation of ceramic matrix composites (CMCs) is limited due to their high machining costs. To overcome this problem, modified grinding wheels, one macro-structured by segmenting and another laser-structured were used. The grinding tests were carried out at different material removal rates and cutting speeds. The grinding forces, surface roughness, and induced residual stress were compared. The results showed that the wheel structuring resulted in a better performance of the grinding wheel. The grinding forces were respectively 30% and 20% lower in the case of segmented wheel and laser-structured wheel in comparison with the conventional grinding. In addition, the tensile residual stress was reduced as a negative output of the grinding process via structuring. A high-speed high-efficient grinding of CMCs without presence of surface damage was achieved by optimising the process parameters. The material removal rate could be elevated without changing the grinding forces with application of the structured wheel.

Ceramic matrix composites

CMCs

Laser-structure

Segmented wheel

High efficiency grinding

High speed grinding

Författare

Bahman Azarhoushang

Hochschule Furtwangen (HFU)

Mohammadali Kadivar

Hochschule Furtwangen (HFU)

Chalmers, Industri- och materialvetenskap, Material och tillverkning

Robert Bösinger

Hochschule Furtwangen (HFU)

Sergey Shamray

Hochschule Furtwangen (HFU)

Ali Zahedi

Hochschule Furtwangen (HFU)

Amir Daneshi

Hochschule Furtwangen (HFU)

International Journal of Abrasive Technology

1752-2641 (ISSN) 1752-265X (eISSN)

Vol. 9 1 1-15

Ämneskategorier

Bearbetnings-, yt- och fogningsteknik

Annan materialteknik

Farkostteknik

DOI

10.1504/IJAT.2019.097964

Mer information

Senast uppdaterat

2019-03-26