Effect of ply thickness and ply level hybridization on the compression after impact strength of thin laminates
Artikel i vetenskaplig tidskrift, 2019

There is a lack of research available on how thin laminates respond to impact and post impact loads, even though thin structures are used in present-day aircrafts. This experimental paper employs thick, standard and thin uni-directional plies to investigate the effect ply thickness has on thin laminates on their impact and compression after impact (CAI) response. Further, we propose two hybrid laminates where thick or standard plies are mixed with thin plies, respectively, in an effort to improve the CAI strength of thin laminates. Results reveal that, contrary to thick laminates, thin laminates made of only thin plies exhibit extensive fibre failure, leading to a considerably reduced CAI strength. Moreover, the hybrid laminate where thick 0° plies are mixed with thin plies improves the CAI strength by 40% over the thin ply baseline laminate. Thus, hybridization with thin laminates appears to be an economic prospective in terms of improving damage tolerance.

Damage tolerance

Damage mechanics

Impact behaviour

Compression after impact

Ply hybridization

Författare

A. Sasikumar

Universitat de Girona

D. Trias

Universitat de Girona

J. Costa

Universitat de Girona

N. Blanco

Universitat de Girona

J. Orr

University of Dayton Research Institute

Peter Linde

Chalmers, Industri- och materialvetenskap, Material- och beräkningsmekanik

Composites Part A: Applied Science and Manufacturing

1359-835X (ISSN)

Vol. 121 232-242

SORCERER

Europeiska kommissionen (Horisont 2020), 2017-02-01 -- 2020-02-28.

Ämneskategorier

Polymerkemi

Farkostteknik

Kompositmaterial och -teknik

Styrkeområden

Materialvetenskap

DOI

10.1016/j.compositesa.2019.03.022

Mer information

Senast uppdaterat

2019-09-27