Squeak and rattle prevention by geometric variation management using a two-stage evolutionary optimisation approach
Artikel i vetenskaplig tidskrift, 2022

Squeak and rattle are annoying sounds that are often regarded as failure indicators by car users. Geometric variation is a key contributor to the generation of squeak and rattle sounds. Optimization of the connection configuration in assemblies can be a provision to minimize this risk. However, the optimization process for large assemblies can be computationally expensive. The focus of this work is to propose a two-stage evolutionary optimization scheme to find the fittest connection configurations that minimize the risk for squeak and rattle. This was done by defining the objective functions as the measured variation and deviation in the rattle direction and the squeak plane. In the first stage, the location of the fasteners primarily contributing to the rattle direction measures is identified. In the second stage, fasteners primarily contributing to the squeak plane measures are added to the fittest configuration from phase one. It was assumed that the fasteners from the squeak group plane have a lower-order effect on the rattle direction measures, compared to the fasteners from the rattle direction group. This assumption was falsified for a set of simplified geometries. Also, a new uniform space filler algorithm was introduced to efficiently generate an inclusive and feasible starting population for the optimization process by incorporating the problem constraints in the algorithm. For two industrial cases, it was shown that by using the proposed two-stage optimization scheme, the variation and deviation measures in critical interfaces for squeak and rattle improved compared to the baseline results.

computer-aided design

computational foundations for engineering optimization

squeak and rattle

tolerance stack-up

genetic algorithm

robust design

geometric variation management

multidisciplinary optimization

gd&t/tolerance modeling

Författare

Mohsen Bayani

Chalmers, Industri- och materialvetenskap

Casper Wickman

Chalmers, Industri- och materialvetenskap, Produktutveckling

Lars Lindkvist

Chalmers, Industri- och materialvetenskap, Produktutveckling

Rikard Söderberg

Chalmers, Industri- och materialvetenskap

Journal of Computing and Information Science in Engineering

1530-9827 (ISSN)

Vol. 22 1 JCISE-20-1301

Squeak and Rattle Prediction for Robust Product Development

Volvo Cars, 2016-08-01 -- .

Ämneskategorier

Maskinteknik

Teknisk mekanik

Farkostteknik

Styrkeområden

Transport

Produktion

DOI

10.1115/1.4051343

Mer information

Skapat

2021-09-02