The Effects of Graphene-Based Films as Heat Spreaders for Thermal Management in Electronic Packaging
Paper i proceeding, 2016

Graphene-based films (GBF) were fabricated using a chemical conversion process including graphene oxide (GO) preparation by use of Hummer’s method, graphene oxide reduction using L-ascorbic acid (LAA), and finally film formation by vacuum filtration. GBF is considered as a candidate material for thermal management, i.e. for removing heat from hotspots in power electronic packaging, due to its high thermal conductivity. In this work, the GBF heat spreading performance in 3D TSV packaging was analysed using finite element methods (FEM) implemented in the COMSOL software. Both size effects and the influence of the thermal conductivity of the GBF heat spreader on the thermal performance of the 3D TSV package were evaluated. Furthermore, the size effects of the thermal conductive adhesive (TCA) underfill between the chip and the printed circuit board (PCB) were analysed. The results obtained are critical for proper design of graphene-based lateral heat spreaders in high power electronic packaging.

Thermal performance

Finite element analysis

Electronic packaging

Graphene-based film

Författare

Shirong Huang

Jie Bao

N. Wang

G. Yuan

Wei Ke

Dongsheng Zhang

Wang Yue

Yifeng Fu

Chalmers, Mikroteknologi och nanovetenskap, Elektronikmaterial

Lilei Ye

Kjell Jeppson

Chalmers, Mikroteknologi och nanovetenskap, Elektronikmaterial

Johan Liu

Chalmers, Mikroteknologi och nanovetenskap, Elektronikmaterial

2016 17th International Conference on Electronic Packaging Technology, ICEPT 2016

Art no 7583272; Pages 889-892
978-1-5090-1396-8 (ISBN)

Styrkeområden

Nanovetenskap och nanoteknik

Produktion

Ämneskategorier

Nanoteknik

DOI

10.1109/ICEPT.2016.7583272

ISBN

978-1-5090-1396-8

Mer information

Senast uppdaterat

2018-09-21