Understanding the microstructure-properties relationship of low-temperature carburized austenitic stainless steels through EBSD analysis
Artikel i vetenskaplig tidskrift, 2017

The present article is dedicated to the microstructural characterization of the surface layer of two different austenitic stainless steels, 304L and 904L, subjected to a low-temperature carburizing process (Kolsterising®,Bodycote) and a subsequent annealing at high-temperature. The carburizing treatment forms a hard expanded austenite in both materials. However, thermal decomposition occurs at high temperatures through precipitation of chromium-carbides, hence compromising the surface hardness of the treated materials. The purpose of this paper is to explore the potential applicability of electron backscatter diffraction (EBSD) technique to reveal the correlation between phase transformation and hardness. First of all, EBSD was used to create kernel average misorientation (KAM) maps of the modified surface layers to identify the internal strains. Moreover,the preferential sites for precipitation of chromium-compound during annealing were identified. We prove here that EBSD can provide useful information to distinguish the main hardening mechanisms within modified surface layers at different annealing conditions. When combined with nano-indentation, X-ray diffraction(XRD) and glow discharge optical emission spectrometry (GDOES), an effective bridge between macro and microanalysis can be obtained. Solid solution hardening was found to be the dominant mechanismin as-carburized materials, with pre-existing strain promoting a higher supersaturation. In the annealed materials, the alloy composition and surface finish can also dictate the preferential sites of precipitation and can therefore affect the residual hardening.

Expanded austenite

Austenitic stainless steel

Kolsterising

EBSD

Surface modification

S-phase

Kernel average misorientation

Författare

Giulio Maistro

Chalmers, Material- och tillverkningsteknik, Yt- och mikrostrukturteknik

Christos Oikonomou

Chalmers, Material- och tillverkningsteknik, Yt- och mikrostrukturteknik

Lina Rogström

Linköpings universitet

Lars Nyborg

Chalmers, Material- och tillverkningsteknik, Yt- och mikrostrukturteknik

Yu Cao

Chalmers, Material- och tillverkningsteknik, Yt- och mikrostrukturteknik

Surface and Coatings Technology

0257-8972 (ISSN)

Vol. 322 322 141-151

Ämneskategorier

Materialteknik

Styrkeområden

Materialvetenskap

DOI

10.1016/j.surfcoat.2017.05.036

Mer information

Senast uppdaterat

2022-04-05