TiO2 Nanoparticles Functionalized Sn/3.0Ag/0.5Cu Lead-free Solder
Paper i proceeding, 2012

As the development of micro-systems moves towards higher speed and miniaturization, the requirement for interconnection density increases significantly. However, the use of conventional solders will be limited as the increasing I/O density lowers the pitches to very small size. Recently, there have been great developments in nano-composite solders. This paper investigated the influence of nano-titanium dioxide (TiO 2 ) of 99.9% purity on the wettability, micro-structural, melting and mechanical properties of Sn/3.0Ag/0.5Cu. The composite solder was prepared by mechanically mixing solder paste with TiO 2 nanoparticles for 30 minutes. The TiO 2 nanoparticles, with average diameter of 10 nm, were manufactured by precipitation. The solder paste was SAC305 Type 4. After reflow soldering the wetting angle was measured. The microstructure of the composite solders and TiO 2 was studied by means of scanning electron microscope (SEM). An optical microscope (OM) was employed to observe the fracture mode after shear test. A pull test was performed to investigate the shear strength of all samples with composite solders between two PCBs with Sn coating, both before and after thermal cycling (TC) with range between -40°C and 85°C. Differential scanning caborimetry (DSC) was adopted to analyze the melting point of composite solders. The results indicate that when the TiO 2 content increased from 0.5% to 2%, the wettability of the solder improved, which resulted in higher shear strength and better mechanical behavior. © 2012 IEEE.

Författare

Manman Rui

Shanghai University

Xiuzhen Lu

Shanghai University

Si Chen

Chalmers, Teknisk fysik, Elektronikmaterial

Lilei Ye

SHT Smart High-Tech

Johan Liu

Chalmers, Teknisk fysik, Elektronikmaterial

Proceedings of IEEE CPMT 2012 International Conference on Electronic Packaging Technology & High Density Packaging

203-207
978-146731680-4 (ISBN)

Ämneskategorier

Annan elektroteknik och elektronik

DOI

10.1109/ICEPT-HDP.2012.6474601

ISBN

978-146731680-4

Mer information

Senast uppdaterat

2018-03-07