Acceptance criterion for rail roughness level spectrum based on assessment of rolling contact fatigue and rolling noise
Artikel i vetenskaplig tidskrift, 2011

The influences of train speed and rail roughness level on rolling noise and subsurface initiated rolling contact fatigue (RCF) impact are studied. In particular, the consequences of short-pitch rail corrugation on tangent track with wavelengths in the interval 3-8 cm are simulated using models of dynamic vehicle-track interaction. Based on the calculated results, a criterion in terms of a limit for maximum levels of rail roughness with respect to the current traffic conditions can be determined. Such a criterion may be useful for planning of rail grinding intervals if used together with a system for regular monitoring of rail roughness levels. It is concluded that the importance of controlling rail roughness increases with increasing train speed. Increasing axle loads on freight vehicles from 22.5 tonnes to 30 tonnes leads to a significant increase in RCF impact. In operational practice, this is usually compensated for by introducing more conformal wheel-rail profile combinations. Calculated vertical wheel-rail contact forces and rolling noise levels show good agreement with field measurements.

Rolling noise

Rail roughness level

Corrugation

Rolling contact fatigue

Acceptance criterion

Författare

Jens Nielsen

Dynamik

Anders Ekberg

Dynamik

Wear

0043-1648 (ISSN)

Vol. 271 1-2 319-327

Ämneskategorier

Maskinteknik

DOI

10.1016/j.wear.2010.10.013

Mer information

Skapat

2017-10-07