Simulation-based planning of maintenance activities by a shifting priority method
Paper i proceeding, 2015

Machine failures are major causes of direct downtime as well as system losses (blocked and idle times) in production flows. A previous case study shows that prioritizing bottleneck machines over others has the potential to increase the throughput by about 5%. However, the bottleneck machine in a production system is not static throughout the process of production but shifts from time to time. The approach for this paper is to integrate dynamic maintenance strategies into scheduling of reactive maintenance using Discrete Event Simulation. The aim of the paper is to investigate how a shifting priority strategy could be integrated into the scheduling of reactive maintenance. The approach is applied to and evaluated in an automotive case-study, using simulation for decision support. This shows how to shift prioritization by tracking the momentary bottleneck of the system. The effect of shifting priorities for planning maintenance activities and its specific limitations is discussed.

Dynamic bottleneck detection

Maintenance Planning

Discrete Event Simulation

Författare

Maheshwaran Gopalakrishnan

Chalmers, Produkt- och produktionsutveckling, Produktionssystem

Anders Skoogh

Chalmers, Produkt- och produktionsutveckling, Produktionssystem

Christoph Laroque

University of Applied Sciences of Zwickau

Proceedings - Winter Simulation Conference

08917736 (ISSN)

2168-2179

Ämneskategorier

Produktionsteknik, arbetsvetenskap och ergonomi

Tillförlitlighets- och kvalitetsteknik

Styrkeområden

Produktion

DOI

10.1109/WSC.2014.7020061

Mer information

Senast uppdaterat

2023-08-08