Optimal Sizing of a Series PHEV: Comparison between Convex Optimization and Particle Swarm Optimization
Paper i proceeding, 2015

Building a plug-in hybrid electric vehicle that has a low fuel consumption at low hybridization cost requires detailed design optimization studies. This paper investigates optimization of a PHEV with a series powertrain configuration, where plant and control parameters are found concurrently. In this work two often used methods are implemented to find optimal energy management with component sizes. In the first method, the optimal energy management is found simultaneously with the optimal design of the vehicle by using convex optimization to minimize the sum of operational and component costs over a given driving cycle. To find the integer variable, i.e., engine on-o, dynamic programming and heuristics are used. In the second method, particle swarm optimization is used to find the optimal component sizing, together with dynamic programming to find the optimal energy management. The results show that both methods converge to the same optimal design, achieving a 10.4% fuel reduction from the initial powertrain design. Additionally, it is highlighted that the usage of each of the method poses challenges, such as computational time (where convex optimization outperform particle swarm optimization by a factor of 20) and the tuning effort for the particle swarm optimization and the ability to handle integer variables of convex optimization.

Författare

Mitra Pourabdollah

Chalmers, Signaler och system, System- och reglerteknik

Emilia Silvas

Technische Universiteit Eindhoven

Nikolce Murgovski

Chalmers, Signaler och system, System- och reglerteknik

Maarten Steinbuch

Technische Universiteit Eindhoven

Bo Egardt

Chalmers, Signaler och system, System- och reglerteknik

IFAC-PapersOnLine

24058963 (eISSN)

Vol. 48 15 16-22

Styrkeområden

Transport

Energi

Ämneskategorier

Reglerteknik

DOI

10.1016/j.ifacol.2015.10.003

Mer information

Senast uppdaterat

2023-08-08