Corrosion of stainless steels in simulated diesel exhaust environment with urea
Artikel i vetenskaplig tidskrift, 2012

Laboratory exposures have been performed simulating a selective catalytic reduction (SCR) system with urea injection for NOx reduction in diesel exhaust after-treatment. The corrosion behaviour of three ferritic and one austenitic stainless steel was examined using X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES). Continuous exposure to condensate did not cause any corrosion. Results show that cyclic interaction between high temperature and condensation aggravates the corrosion compared to isothermal exposure at 450 degrees C. All ferritic alloys exhibited more or less the same behaviour, while the austenitic steel performed better. In fact, the presence of urea decreased the corrosion compared to the environment without urea. The cyclic samples exposed with urea displayed iron sulphate on the surface. The sulphate appeared to decrease the oxide thickness. A sulphur enrichment in the form of sulphide also occurred in the inner chromium-rich oxides of all cyclically exposed samples, both with and without urea. Thus, sulphidation is presumed to be involved in the corrosion process.

AES

SCR

high temperature corrosion

reduction

XPS

oxidation

304l

urea

stainless steel

diesel exhaust

Författare

Johanna Nockert

Chalmers, Material- och tillverkningsteknik, Yt- och mikrostrukturteknik

Lars Nyborg

Chalmers, Material- och tillverkningsteknik, Yt- och mikrostrukturteknik

Mats Norell

Chalmers, Material- och tillverkningsteknik, Yt- och mikrostrukturteknik

Materials and Corrosion - Werkstoffe und Korrosion

09475117 (ISSN) 1521-4176 (eISSN)

Vol. 63 5 388-395

Ämneskategorier

Materialteknik

DOI

10.1002/maco.201005783

Mer information

Skapat

2017-10-07