Estimation of critical cooling rates for formation of amorphous alloys from critical sizes
Artikel i vetenskaplig tidskrift, 2012

The critical cooling rate for marginal glass formers, like Al-based alloys, is difficult to measure experimentally. In this work, we acquired the critical cooling rate for formation of amorphous alloys by estimating the cooling rates of the specimens with critical dimensions. Analytical solutions were given to estimate the cooling rates for the gas-atomized powders and melt-spun ribbons, and as an example the critical cooling rate to form an amorphous Al82Ni10Y8 alloy was estimated to be similar to 1.0 x 10(6) K s(-1). The effect of melt temperature on the cooling rate was quantitatively evaluated and its effect on the glass forming ability was also discussed. (c) 2012 Elsevier B.V. All rights reserved.

Författare

Y. Liu

Journal of Non-Crystalline Solids

0022-3093 (ISSN)

Vol. 358 20 2753-2758

Ämneskategorier

Materialteknik

DOI

10.1016/j.jnoncrysol.2012.06.023

Mer information

Skapat

2017-10-10