Reversed air staging - a method for reduction of N2O emissions from fluidized bed combustion of coal
Artikel i vetenskaplig tidskrift, 1998

Reversed air staging, a method for reduction of N2O emissions, was studied in a 12 MW circulating fluidized bed boiler. The effect of combustor air-ratio, bed temperature, load and limestone addition ratio was investigated. The results indicate that if only the air distribution is changed, the emission of N2O can be decreased to one fourth compared to normal air staging at a temperature of 850°C, with maintained low emissions of NO,´SO2 and CO. With increased bed temperature, 870°C, in combination with increased limestone addition, from Ca/S molar ratio = 3 to 4, it was possible to reduce N2O by 90 vol% with low emissions of NO, SO2 and CO. The method was less efficient at low load, because of the lower cyclone temperature. Also the effect of redistribution of some of the air added in the cyclone outlet to the cyclone inlet was studied. This did not, however, give any improvement in the boiler used compared to adding all of the air in the cyclone outlet. There was no significant difference in combustion efficiency between reversed air staging and normal air staging.

fluidized-bed

combustion

N2O

Författare

Anders Lyngfelt

Institutionen för energiomvandling

Lars-Erik Åmand

Institutionen för energiomvandling

Bo G Leckner

Institutionen för energiomvandling

Fuel

Vol. 77 9-10 953-959

Drivkrafter

Hållbar utveckling

Ämneskategorier

Energiteknik

Annan naturresursteknik

Styrkeområden

Energi

Infrastruktur

Chalmers kraftcentral

Mer information

Skapat

2017-10-08