Assessment of GPS derived speed for verification of speed measuring devices
Journal article, 2014

Speed information from GPS is increasingly used and provides an alternative to conventional methods such as wheel speed sensors. We investigate the possibility to use GPS derived speed as a reference when verifying laser and radar-based speed measuring devices used in traffic enforcement. We have set up a realistic test scenario where a GPS equipped vehicle was driven at three different speeds (40, 90 and 130 km/h) through a pre-defined measurement zone. An independent and traceable reference speed was calculated by accurately measuring the length of the measurement zone (approximately 15 metres), and the time it took to pass through it. The reference speed was compared to the average GPS speed for each passage. This comparisons show that the standard uncertainty of such GPS speed measurements is less than 0.05 km/h. Hence, GPS derived speed meets the accuracy requirements for verification of laser and radar based speed measuring devices.

radar based speed measuring devices.

instrumentation technology

measurement uncertainty

global positioning systems

speed measurement

vehicle speed

GPS

traceability

laser based speed measuring devices

legal metrology

speed enforcement

Author

Erik M Steinmetz

Chalmers, Signals and Systems, Communication, Antennas and Optical Networks

Per O. J. Jarlemark

Ragne Emardson

Håkan Skoogh

Magnus Herbertsson

Int. J. of Instrumentation Technology

2043-7862 (eISSN)

Vol. 1 3 212-227

Areas of Advance

Transport

Subject Categories

Transport Systems and Logistics

Signal Processing

DOI

10.1504/IJIT.2014.065160

More information

Latest update

8/16/2019