Wet Spun Fibers from Solutions of Cellulose in an Ionic Liquid with Suspended Carbon Nanoparticles
Journal article, 2015

Wet spun fibers from solutions of dissolving pulp in 1-ethyl-3-methylimidazolium acetate (EmimAc) with up to 50 wt % (based on cellulose) suspended carbon black and graphene nanoplatelets particles were studied. Carbon fillers were dispersed by simple shearing in a Couette type mixer and the resulting spin dope was extruded into a hot water coagulation bath from a single hole spinneret. Microstructure, mechanical properties, and electrical conductivity were assessed as a function of filler loading and discussed in comparison to melt spun fibers with similar fillers. The coagulation process and subsequent drying of wet spun fibers was found to produce a significant microporosity, more so the higher the filler loading. The electrical percolation threshold was quite high in the wet spun fibers and relatively modest values of conductivity were obtained with regard to the high filler loadings. Carbon black was found to be superior to graphene nanoplatelets. This was related to flow-induced orientation effects. The mechanical properties of the carbon-filled fibers were found to be similar or lower compared to the pure cellulose fibers because of low interfacial interactions and formation of microporosity.

conducting polymers


cellulose and other wood products

graphene and fullerenes


mechanical properties


Linda Härdelin

Chalmers, Chemistry and Chemical Engineering, Applied Chemistry, Pharmaceutical Technology

Bengt Hagström

Chalmers, Materials and Manufacturing Technology, Polymeric Materials and Composites

Journal of Applied Polymer Science

0021-8995 (ISSN) 1097-4628 (eISSN)

Vol. 132 6

Subject Categories

Textile, Rubber and Polymeric Materials



More information