Modelling VOC levels in a new office building using passive sampling, humidity, temperature, and ventilation measurements
Journal article, 2023

New buildings often have high initial concentrations of VOCs that, although not necessarily harmful, may be disturbing and cause discomfort among occupants. In new buildings, running the ventilation system continuously and at full rate during the first year is common practice to reduce VOC levels. However, the drawback of such an arbitrary strategy is the risk of over-ventilating with unnecessary heat losses as a consequence. In this article, a new approach, a VOC-passport, is developed where early measurements of VOCs together with a calculation model are used to find an optimized ventilation strategy. The proposed calculation model is tested on two newly built office rooms where VOCs were measured using passive samplers, together with temperature, humidity and ventilation rates, and it shows good agreement with measurements. An example of how a daily ventilation schedule may look like if optimized with the prosed model is presented. The example illustrates that in buildings where VOC levels are allowed to increase periodically, VOC levels can be kept at acceptable levels during occupancy hours if the effective storage capacity is known. The proposed method has a potential to improve the indoor air quality in new buildings without compromising energy efficiency.

Emission modelling

Indoor air quality

Odour

Formaldehyde

Material emissions

VOC

Author

Fredrik Domhagen

Chalmers, Architecture and Civil Engineering, Building Technology

Sarka Langer

Chalmers, Architecture and Civil Engineering, Building Services Engineering

IVL Swedish Environmental Research Institute

Angela Sasic Kalagasidis

Chalmers, Architecture and Civil Engineering, Building Technology

Building and Environment

0360-1323 (ISSN)

Vol. 238 110337

Subject Categories

Building Technologies

DOI

10.1016/j.buildenv.2023.110337

More information

Latest update

5/26/2023