Design and optimization of a cascade hydrogen storage system for integrated energy utilization
Journal article, 2024

In an integrated hydrogen energy utilization system, the hydrogen storage device needs to meet hydrogen supplies and demands of different pressure levels, traditional hydrogen storage systems will lead to more energy consumption and lower hydrogen supply efficiency. To address this problem, a cascade hydrogen storage system (CHSS) is proposed in this study. By configuring three hydrogen storage tanks (HSTs) with three pressure levels, the CHSS is capable of serving hydrogen for fuel cell supply, long-term storage, and refueling stations. The corresponding control strategy of hydrogen flow between HSTs is proposed. It shows that an optimal capacity configuration scheme with pressures of 3 MPa, 24.44 MPa, and 45 MPa and a hydrogen storage capacity of 401.7 kg, optimized by NSGA-II, can meet the stable operation of the system. Comparative studies show that the proposed CHSS configuration can reduce the cost by about 3.78 %, the energy consumption by about 6.92 %, and the hydrogen supply loss rate by about 12 % compared to the existing solutions under the tested conditions.

Hydrogen storage system

Integrated hydrogen energy utilization system

Multipath

Author

Shihao Zhu

Wuhan University of Technology

Banghua Du

Wuhan University of Technology

Xinyu Lu

Wuhan University of Technology

Changjun Xie

Wuhan University of Technology

Yang Li

Chalmers, Electrical Engineering, Systems and control

Yunhui Huang

Wuhan University of Technology

Leiqi Zhang

State Grid Zhejiang Electric Power Research Institute

Bo Zhao

State Grid Zhejiang Electric Power Research Institute

Journal of Energy Storage

2352-152X (eISSN)

Vol. 96 112732

Driving Forces

Sustainable development

Subject Categories

Energy Engineering

Areas of Advance

Energy

DOI

10.1016/j.est.2024.112732

More information

Latest update

7/16/2024