Understanding Cellulose Across Length Scales: A Multiscale Perspective on Chemistry, Structure, and Surface Chemistry
Doctoral thesis, 2026

This thesis addresses the question: how do chemical modification, drying history, pulp processing and thermal treatments reorganize cellulose fibers across length scales, from micrometer-scale fiber morphology and nanometer-scale fibrillar arrangement to the molecular composition of the fiber surface? To answer this, dialcohol cellulose (DALC) fibers with different degrees of modification serve as a model system for relating chemical modification to fiber wall structure and swelling, while Kraft handsheets and hot-pressed chemi-thermomechanical pulp (CTMP) sheets are used to study how processing changes the surface chemistry of industrially relevant fiber materials.

At the fiber wall scale, increasing DALC modification shifts the swelling behavior from mild bulging to pronounced balloon-collar morphology and, at the highest modification level, to uniformly swollen fibers. Small- and wide-angle X-ray scattering (SAXS/WAXS) shows that modification reduces crystalline order and increases the SAXS-derived characteristic length, an apparent length scale of the fibrillar arrangement in the fiber wall. This length depends on drying history: it is largest in never-dried fibers, decreases on drying, and is largely, but not completely, restored upon rewetting. In never-dried fibers, the characteristic length increases together with the water retention value, indicating that macroscopic swelling capacity is related to the nanoscale arrangement of the fiber wall.

Having linked bulk chemistry to internal structure, the thesis then moves to the fiber surface, the interface that governs how these materials ultimately perform. A ToF-SIMS and multivariate workflow was developed to separate lignin- and polysaccharide-associated ions in softwood Kraft handsheets. Marker ions were first identified on compacted reference materials of cellulose, hemicelluloses and lignin, and were retained only if they were reproducible across replicate spectra and not dominated by contaminants, adducts or overlapping peaks, a conservative approach that minimizes false-positive assignments. Applied to bleached and unbleached handsheets, the selected ions captured the lignin removal caused by bleaching. Matrix effects make these comparisons semi-quantitative. Extending this workflow to industrially hot-pressed CTMP papers showed that temperature reorganizes the surface composition, driving extractives and fatty-acid-related species to migrate and concentrate at the roll-contact interface as processing temperature rises. Together, these results deliver the thesis's central message: surface composition is not a passive reflection of bulk chemistry, but an actively reorganized, processing-dependent property.

fiber wall swelling

CTMP

drying history

softwood Kraft fibers

degree of modification (DOM)

ToF-SIMS

Dialcohol cellulose (DALC)

hot-press

SAXS/WAXS

hornification

chemometrics (PCA/OPLS-DA/SUS)

Viva, floor 10, Forskarhuset 1, Chemistry Building, Kemigården 4 (Chalmers, Johanneberg campus). Zoom passcode: 525354
Opponent: Professor Pedro Fardim, KU Leuven (Department of Chemical Engineering, CREaS), Belgium

Author

Nivedhitha Venkatraman

Chalmers, Chemistry and Chemical Engineering, Applied Chemistry

Drop a paper towel in water and it swells within seconds. Paper is a web of tiny fibers; each fiber wall is built from even tinier cellulose fibrils, and water slips in between them. This thesis asks why that response depends on a fiber’s history: how a fiber is treated, by chemistry, drying or heat, changes how these fibrils are arranged and what reaches the fiber surface.

In the first part of the work, I used cellulose fibers that were chemically modified to different degrees as a model system. With more modification, the fibers swell differently in water. At first they bulge gently in places along the fibers, then form a balloon-like collar, and at the highest level they swell evenly all along their length. X-ray scattering showed what happens inside: modification loosens the order of the cellulose crystals, and the way fibrils are arranged in the fiber wall depends on whether the fiber has ever been dried. Drying changes that arrangement, and rewetting restores most of it, but not all.

The second part looks at the surface, which is what actually touches the world. Using mass spectrometry that reads the chemistry of the outermost molecular layers, I could tell lignin from carbohydrate on paper surfaces, and see how bleaching removes lignin. Then came the surprise. When paper is pressed with heat, the surface does not simply mirror what is inside. Fatty and extractive compounds move to the surface as the temperature rises.

So the surface of paper is not just a window onto the fiber. It is shaped by how the paper was made. And the next time a paper towel swells in a puddle, you’ll know there’s plenty going on inside it.

Investigating Pulp Fiber Properties Using Advanced SIMS and X-ray Scattering Techniques

Bo Rydin Foundation/SCA (F25/10), 2025-11-01 -- 2026-12-31.

PROcesses for DiAlcohol Cellulose PROduction - ProDAC

VINNOVA (2021-02094), 2021-11-01 -- 2024-08-31.

Driving Forces

Sustainable development

Roots

Basic sciences

Infrastructure

Chalmers Materials Analysis Laboratory

Subject Categories (SSIF 2025)

Wood Science

Paper, Pulp and Fiber Technology

Areas of Advance

Materials Science

DOI

10.63959/chalmers.dt/5966

ISBN

978-91-8103-509-4

Doktorsavhandlingar vid Chalmers tekniska högskola. Ny serie: 5966

Publisher

Chalmers

Viva, floor 10, Forskarhuset 1, Chemistry Building, Kemigården 4 (Chalmers, Johanneberg campus). Zoom passcode: 525354

Online

Opponent: Professor Pedro Fardim, KU Leuven (Department of Chemical Engineering, CREaS), Belgium

More information

Latest update

11/5/2026