Transient thermal behaviour of a cylindrical wood particle during devolatilization in a bubbling fluidized bed
Journal article, 2008

This work proposes a transient heat transfer model to predict the thermal behaviour of wood in a heated bed of sand fluidized with nitrogen. The 2-D model in cylindrical coordinates considers wood anisotropy, variable fuel properties, fuel particle shrinkage, and heat generation due to drying and devolatilization. The influence of initial fuel moisture content, thermal diffusivity, particle geometry, shrinkage, external heat transfer coefficient, chemical reaction kinetics and heats of reaction on temperature rise is presented. The cylindrical wood particles chosen for the study have length (l) = 20 mm, diameter (d) = 4 mm and l = 50 mm and d = 10 mm, both having an aspect ratio (l/d) of 5. The bed temperature is 1123 K. The model prediction is validated using measurements obtained from literature. The temperature rise in the wood particle is found to be sensitive to changes in the moisture content and thermal diffusivity and heat of reaction (in larger particles) while it is less sensitive to the external heat transfer coefficient and chemical kinetics. Also shrinkage is found to have a compensating effect and it does not have any significant influence on the temperature rise. Beyond an aspect ratio of three, the wood particle behaves as a 1-D cylinder. © 2008 Elsevier B.V. All rights reserved.


Fluidized bed




Thermal behaviour


M Sreekanth

Ajit Kumar Kolar

Bo G Leckner

Chalmers, Energy and Environment, Energy Technology

Fuel Processing Technology

Vol. 89 9 838-850

Subject Categories

Energy Engineering

More information