Virtual variation simulation of CAD/CAM template-guided surgeries performed on human cadavers: Part II
Journal article, 2010

Material and methods Seventeen computer-aided plans were used for virtual variation simulation of surgeries conducted on 17 human cadavers and 145 implants placed in the cadavers. For each surgery, 10,000 virtual surgeries were performed, resulting in 1,450,000 implant placements. The results from the virtual variation simulations were statistically compared with the results from the actual surgeries. The Mann-Whitney U test was used to compare the implant distributions (α=.05). Results In the maxillae, the difference between the simulated average mean of the mean and the compared surgical average of the median was 0.22 mm (apex) and −0.35 mm (hex), and for the mandible, the corresponding values were −0.19 mm (apex) and −0.69 mm (hex). The simulated average mean of the range compared to the mean range of the maximum deviation results from the surgeries of the maxillae was 2.96 mm (apex) and 0.44 mm (hex), and 2.3 mm (apex) and 0.26 mm (hex) for the mandible. The implant distributions between the simulations and the surgeries were significantly different at both the hex (P<.001) and apex (P<.001). Statement of problem CAD/CAM template-guided surgery has gained attention as a method of improving the predictability of dental implant placement. However, due to possible variations during the manufacturing process and in the robustness of the template design, a virtual prediction of the potential positioning of the implants is needed Purpose The purpose of this study was to perform virtual variation simulations on virtually planned implant placements and to compare them with corresponding results from actual surgeries performed on human cadavers in a previous study. Material and methods Seventeen computer-aided plans were used for virtual variation simulation of surgeries conducted on 17 human cadavers and 145 implants placed in the cadavers. For each surgery, 10,000 virtual surgeries were performed, resulting in 1,450,000 implant placements. The results from the virtual variation simulations were statistically compared with the results from the actual surgeries. The Mann-Whitney U test was used to compare the implant distributions (α=.05). Results In the maxillae, the difference between the simulated average mean of the mean and the compared surgical average of the median was 0.22 mm (apex) and −0.35 mm (hex), and for the mandible, the corresponding values were −0.19 mm (apex) and −0.69 mm (hex). The simulated average mean of the range compared to the mean range of the maximum deviation results from the surgeries of the maxillae was 2.96 mm (apex) and 0.44 mm (hex), and 2.3 mm (apex) and 0.26 mm (hex) for the mandible. The implant distributions between the simulations and the surgeries were significantly different at both the hex (P<.001) and apex (P<.001). Conclusions The implant distributions were neither static nor normally distributed. Thus, within the limitations of this study, the definitive geometrical variations of the implants were not static, as they depend on the individual anatomy of the jaws and the ability to place the CAD/CAM-guided surgical template in the proper position. (J Prosthet Dent 2010;104:48-55)

dentistry

Simulation

surgery

Author

Timo Kero

Chalmers, Product and Production Development, Product Development

Andreas Pettersson

Karolinska Institutet

Jenny Fäldt

Division of Early Development

Matts Andersson

Chalmers, Product and Production Development, Product Development

Luc Gillot

Paris Descartes University

Bernard Cannas

Paris Descartes University

Karin Näsström

Karolinska Institutet

Rikard Söderberg

Chalmers, Product and Production Development, Product Development

Journal of Prosthetic Dentistry

0022-3913 (ISSN) 1097-6841 (eISSN)

Vol. 104 1 48-55

Areas of Advance

Production

Subject Categories

Surgery

Dentistry

Reliability and Maintenance

Other Materials Engineering

DOI

10.1016/S0022-3913(10)60089-3

More information

Latest update

8/1/2018 1