Configuration study of large wind parks
Licentiate thesis, 2003

In this thesis, layouts of various large-scale wind parks, using both AC as well as DC, are investigated. Loss modelling of the wind park components as well as calculations of the energy capture of the turbines using various electrical systems are performed, and the energy production cost of the various park configurations is determined. The most interesting candidate for a DC transmission based wind park was investigated more in detail, the series DC wind park. Finally, the power quality impact in the PCC (point of common coupling) was studied. It was found that from an energy capture point of view, the difference in energy production between various wind turbine systems is very small. Of all the investigated wind park configurations, the wind park with the series connected DC wind turbines seems to have the best potential to give the lowest energy production cost, if the transmission distance is longer then 10-20km. Regarding the series DC wind park it was found that it is the most difficult one to control. However, a control algorithm for the series park and its turbines was derived and successfully tested. Still, several more details regarding the control of the series wind park has to be dealt with.

production cost

PCC

power quality

offshore

HVDC

wind parks

DC/DC converters

control

losses

configurations

flicker

energy capture

Author

Stefan Lundberg

Department of Electric Power Engineering, Power Electronics and Wind Energy

1651-4998 (ISSN)

Subject Categories

Electrical Engineering, Electronic Engineering, Information Engineering

More information

Created

10/7/2017