Considerations on Engine Design and Fuelling Technique Effects on Qualitative Combustion in Alcohol Diesel Engines.
Paper in proceedings, 1998

The paper depicts the main topics of the experimental investigation on alcohol engine development field, aiming at the engineering targets for the emission levels. The first part of this study was focused on engine design optimization for running on ethanol mexed with poly-ethylene glycol (PEG) as ignition improver. It was shown that some design changes in compression ratio, turbine casing, injector nozzle configuration and exhaust pressure governor (EPG) activation, lead to a better engine thermodynamics and thermochemistry. The second objective of this study was the investigation of engine performance and enmission levels, when the ignition improver diethyl ether (DEE) would be generated on board via catalyticallly dehydration of ethanol, and used directly as soluble mixture or separately fumigated. Both alternatives: ether fumigation technique and dissolved ether in alcohol fuel application were conceptually analyzed, and a stand up system based on DEE fumigation was used to determine the optimum DEE-ethanol ratio at any engine operating range. The heat release investigation, when the engine was run on neat ethanol and optimum fumigated DEE, has been indicated earlier combustion, and very short ignition delay. Verified possibilities for using DEE as ignition improver, would lead to a proper version of the on board ether reactor design, which would bring to another solution for ethanol fuelled engines.

Author

Savo Gjirja

Chalmers, Department of Thermo and Fluid Dynamics

Erik Olsson

Chalmers, Department of Thermo and Fluid Dynamics

Anders Karlström

Chalmers, Signals and Systems, Control and Automation Laboratory

SAE, Society of Automotive Engineers, Inc. 400 Commonwealth Drive Warrendale, PA 15096-0001 USA, October 1998

982530 175-187

Subject Categories

Mechanical Engineering

ISBN

0-7680-0305-9

More information

Created

10/7/2017