The Influence of Entrainment on Distribution Ratios in Complexation Studies
Journal article, 2019

Entrainment of a small amount of one phase in the other after phase separation is almost impossible to avoid in solvent extraction. The effect on distribution ratios, D-values, is that the measurement at high D-values results in lower values than the true D-value. The opposite happens with the aqueous phase. Entrainment reduces the maximum effective separation of two substances using countercurrent solvent extraction in mixer-settlers, pulsed columns, and centrifugal extractors. When solvent extraction is used to study the complex formation, the entrainment of a small amount of the organic phase in the aqueous phase reduces the limiting slope observed at low D-values and sometimes makes the accurate determination of one or more of the stability constants impossible. On the other hand, the reduction of the expected limiting slope yields a tool for estimation of the entrainment in the specific case and hence makes it possible to get entrainment data that can be used in comparisons of the efficiencies of different phase separation techniques and equipment. In this work, the effect of entrainment on "effective" D-values is derived in a quantitative way, yielding equations that can be either used to predict "effective" D-values from any given relative entrainment in any phase or used to estimate entrainment by comparing measured "effective" D-values and the corresponding data from test tube experiments with no entrainment.

Entrainment

effective D-values

solvent extraction

Author

Jan-Olov Liljenzin

Chalmers, Chemistry and Chemical Engineering, Energy and Material, Nuclear Chemistry

Solvent Extraction and Ion Exchange

0736-6299 (ISSN) 1532-2262 (eISSN)

Vol. 37 3-4 226-231

Subject Categories

Physical Chemistry

Analytical Chemistry

Geochemistry

DOI

10.1080/07366299.2019.1639357

More information

Latest update

1/21/2020