Development of Numerical Methods for Accurate and Efficient Scale-Resolving Simulations
Licentiate thesis, 2021
This thesis explores and develops numerical methods suitable for hybrid RANS-LES. The methods are implemented in the Computational Fluid Dynamics (CFD) solver M-Edge, a compressible unstructured node-centered edge-based solver. A low-dissipative, low-dispersive numerical scheme was calibrated and verified in LES of turbulent channel flow and Decaying Homogeneous Isotropic Turbulent (DHIT). It was shown that numerical dissipation and dispersion needs to be carefully tuned, in order to accurately predict resolved turbulent stresses and the correct decay of turbulent kinetic energy. The reported results are in good agreement with reference DNS and experimental data.
The optimized numerical scheme was then applied to simulate developing hybrid RANS-LES turbulent channel flow. In order to mitigate the grey area region in the LES zone, a Synthetic Turbulence Generator (STG) was applied at the RANS-LES interface. It was shown that using upstream turbulent statistics from a precursor LES or RANS, the recovery length of the skin friction coefficient could be reduced to just a few boundary layer thicknesses.
A new implicit gradient reconstruction scheme suitable for node-centered solvers was proposed. It was shown that the reconstruction scheme achieves fourth-order scaling on regular grids and third-order scaling on irregular grid for an analytical academic case. The Navier-Stokes Characteristic Boundary Condition (NSCBC) was implemented and verified for transport of an analytical vortex. It was shown that special boundary treatment is needed for transporting turbulent structures through the boundary with minimal reflections.
High-order gradient reconstruction
Chalmers, Mechanics and Maritime Sciences, Fluid Dynamics
"Carlsson, M., Davidson, L., Peng, S.-H., Arvidson, S. Investigation of Turbulence Injection Methods in Compressible Flow Solvers in Large Eddy Simulation"
"Carlsson, M., Davidson, L., Peng, S.-H., Arvidson, S. Higher Order Gradients on Unstructured Meshes using Compact Formulation for Node-Centered Schemes"
"Carlsson, M., Davidson, L., Peng, S.-H., Arvidson, S. Implementation of Nonreflecting Inlet and Outlet Boundary Conditions in the Subsonic Regime for a Node-Based Compressible Solver"
Areas of Advance
Fluid Mechanics and Acoustics
C3SE (Chalmers Centre for Computational Science and Engineering)
Thesis for the degree of Licentiate – Department of Mechanics and Maritime Sciences: 2021:11
Chalmers University of Technology
Opponent: Probst, Axel, DLR, Germany