Dan Lämkull

Showing 33 publications

2018

Data Quality Problems in Discrete Event Simulation of Manufacturing Operations

Jon Bokrantz, Anders Skoogh, Dan Lämkull et al
Simulation. Vol. 94 (11), p. 1009-1025
Journal article
2016

An algorithm for data-driven shifting bottleneck detection

Mukund Subramaniyan, Anders Skoogh, Maheshwaran Gopalakrishnan et al
Cogent Engineering. Vol. 3 (1), p. 1-19
Journal article
2015

A Methodology for Continuous Quality Assurance of Production Data

Jon Bokrantz, Anders Skoogh, Jon Andersson et al
Proceedings - Winter Simulation Conference, p. 2088-2099
Paper in proceedings
2015

Optimal Maintenance Resources Allocation Using Automated Simulation-based Optimisation and Data Management

Amos Ng, Anders Skoogh, Dan Lämkull
ASIM - Simulation in Production and Logistics
Paper in proceedings
2013

Using Methods-Time Measurement to Connect Digital Humans and Motion Databases

Ali Keyvani, Dan Lämkull, Gunnar Bolmsjö et al
Lecture Notes in Computer Science. Vol. 8026 (PART 2), p. 343-352
Paper in proceedings
2013

Considerations for aggregation of motion-captured files in structured databases for DHM applications

Ali Keyvani, Dan Lämkull, Gunnar Bolmsjö et al
DHM 2013, Second International Digital Human Modeling Symposium
Paper in proceedings
2011

Schema for Motion Capture Data Management

Ali Keyvani, Henrik Johansson, Mikael Ericsson et al
Lecture Notes in Computer Science. Vol. 6777, p. 99-108
Paper in proceedings
2009

Digital Human Modeling Simulation Results and Their Outcomes in Reality: A Comparative Study within Manual Assembly of Automobiles

Roland Örtengren, Dan Lämkull, Lars Hanson
SAE International Journal of Passenger Cars - Mechanical Systems. Vol. 2 (1), p. 1600-1613
Paper in proceedings
2009

Corporate-internal vs. national standard – A comparison study of two ergonomics evaluation procedures used in automotive manufacturing

Cecilia Berlin, Roland Örtengren, Dan Lämkull et al
International Journal of Industrial Ergonomics. Vol. 39 (6), p. 940-946
Journal article
2008

DHM in Automotive Manufacturing Applications

Dan Lämkull, Roland Örtengren, Lennart Malmsköld
Handbook of Digital Human Modeling: Research for Applied Ergonomics and Human Factors Engineering. Duffy, V.G. (Ed.). Taylor & Francis, CRC Press.
Book chapter
2008

Uniformity in manikin posturing: A comparison between posture prediction and manual joint manipulation

Dan Lämkull, Lars Hanson, Roland Örtengren
International Journal of Human Factors Modelling and Simulation. Vol. 1 (2), p. 225-243
Journal article
2008

Verifiera ergonomin i förväg med simulering

Dan Lämkull
Verkstäderna. Vol. 104 (7), p. 14-15
Magazine article
2008

A comparative study of digital human modelling simulation results and their outcomes in reality: A case study within manual assembly of automobiles

Dan Lämkull, Lars Hanson, Roland Örtengren
International Journal of Industrial Ergonomics. Vol. 39, p. 428-441
Journal article
2008

DHM - Evaluation Tools.

Dan Lämkull, Cecilia Berlin, Roland Örtengren
Handbook of Digital Human Modeling: Research for Applied Ergonomics and Human Factors Engineering (Human Factors & Ergonomics). Vincent. G. Duffy (Ed.). Taylor & Francis, CRC Press.
Book chapter
2008

Industrial customisation of digital human modelling tools

Dan Högberg, Gunnar Bäckstrand, Dan Lämkull et al
International Journal of Services Operations and Informatics. Vol. 3 (1), p. 53-70
Journal article
2008

Representing the elderly in digital human modelling

Dan Högberg, Lars Hanson, Daniel Lundström et al
The 40th annual Nordic Ergonomic Society Conference, NES 2008, Reykjavík, Iceland, August 11-13.
Paper in proceedings
2008

National Standard vs. Corporate-Internal Ergonomics Evaluation - an Industrial Case Study

Cecilia Berlin, Roland Örtengren, Dan Lämkull et al
The 40th annual Nordic Ergonomic Society Conference, NES 2008, Reykjavík, Iceland, August 11-13
Paper in proceedings
2007

Reduce of ergonomics design flaws through virtual methods.

Gunnar Bäckstrand, Dan Lämkull, Dan Högberg et al
Proceedings of the 39th annual Nordic Ergonomic Society Conference, Lysekil, Sweden, October 1-3, CD-ROM.
Paper in proceedings
2007

The influence of virtual human model appearance on visual ergonomics posture evaluation.

Dan Lämkull, Lars Hanson, Roland Örtengren
Applied Ergonomics. Vol. 38 (6), p. 713-722
Journal article
2007

Digital Human Modeling Requirements and Standardization.

Diana Wegner, Jim Chiang, Berndt Kemmer et al
2007 Digital Human Modeling for Design and Engineering Conference and Exhibition, June 12-14, Seattle, Washington, USA.
Paper in proceedings
2007

Towards Dynamic Ergonomics Analysis of Work Sequences in Virtual Environments.

Dan Högberg, Gunnar Bäckstrand, Dan Lämkull et al
Proceedings of the 17th International Conference on Flexible Automation and Intelligent Manufacturing (2007 FAIM), Philadelphia, USA, June 2007, p. 581-588
Paper in proceedings
2007

Visualisation of human characteristics in vehicle and health care product development.

Mikael Blomé, Lars Hanson, Dan Högberg et al
2007 year’s SIGRAD conference. Uppsala University, 2007, November 29-30,. Vol. 28, p. 31-34
Paper in proceedings
2007

Proactive ergonomics and virtual ergonomics within Manufacturing Department at Volvo Car Corporation.

Dan Lämkull, Ann-Christine Falck, Kristina Troedsson
Proceedings of the 39th annual Nordic Ergonomic Society Conference, Lysekil, Sweden, October 1-3, CD-ROM., p. 6-
Paper in proceedings
2006

Consistency in Figure Posturing Results within and between Simulation Engineers

Dan Lämkull, Lars Hanson, Roland Örtengren
SAE International Journal of Passenger Cars - Electronic and Electrical Systems. Vol. 115 (7), p. 1102-1110
Paper in proceedings
2006

Structured time observation of human modelling tool users' activites.

Mikael Blomé, Lars Hanson, Dan Lämkull et al
In: Proceedings of 16th Triennial World Congress on Ergonomics, International Ergonomics Association, 2006, July 10-14, Maastricht, The Netherlands.
Paper in proceedings
2006

Computer Manikins in Evaluation of Manual Assembly Tasks

Dan Lämkull
Licentiate thesis
2006

Identifying Time Consuming Human Modelling Tool Activities

Mikael Blomé, Dan Lämkull, Emma Nielsen et al
Proceedings of the 2006 SAE Digital Human Modeling for Design and Engineering Conference and Exhibition
Paper in proceedings
2005

The daily use of manikins within the manufacturing department at Volvo Car Corporation – working methodology, developments and wanted improvements.

Dan Lämkull
In: Proceedings of 37th Annual Conference of Nordic Ergonomics Society, October 10-12, Oslo, Norway, p. 86-90
Paper in proceedings
2005

Digital Human Models' Appearance Impact on Observers' Ergonomic Assessment

Dan Lämkull, Lars Hanson, Roland Örtengren
SAE Transactions Journal of Passenger Cars Electric and Electrical Systems and proceedings of the 2005 SAE Digital Human Modeling for Design and Engineering Symposium
Paper in proceedings
2005

Influence of Human Model Appearance on Observer Ergonomic Assessment

Lars Hanson, Dan Lämkull, Roland Örtengren
Proceedings of 37th Annual Conference of Nordic Ergonomics Society, p. 77-81
Paper in proceedings
2005

Simulation for Manufacturing Engineering (ViPP)

Jonas Laring, Marita Christmansson, Tania Dukic et al
SAE Transactions Journal of Materials and Manufacturing. Vol. 114 (5), p. 884-889
Paper in proceedings
2004

Task-related Field of View Parameters

M. Rönnäng, Dan Lämkull, Tania Dukic et al
SAE 2004 Transactions Journal of Aerospace and proceedings of the 2004 SAE Digital Human Modeling for Design and Engineering Symposium
Paper in proceedings

Save references

If you have installed Zotero or Mendeley on your computer you can use a plugin to extract references from the publications you see.

Download plugins:
Zotero
Mendeley

There are no projects.
There might be more projects where Dan Lämkull participates, but you have to be logged in as a Chalmers employee to see them.