Analytical model of gas conversion in a 100 kW chemical-looping combustor for solid fuels—Comparison with operational results
Journal article, 2013

This study analyses results from a 100 kWth chemical-looping combustor, consisting of two interconnected circulating fluidised-bed reactors, for use with solid fuels. The fuel reactor has an internal circulation loop, whereas the circulation loop of the air reactor leads to the fuel reactor. Operation of the unit is flexible, as it is possible to vary key operational parameters in a wide range to investigate the response in system behaviour and performance. Results from a previous study have shown that by varying the fluidisation velocity in three different sections of the unit, a phenomenological relation between gas conversion, fuel reactor bed inventory and global solids circulation can be found. This relation is here studied in more depth, clearly indicating that high gas conversion can only be reached if the fuel reactor bed inventory is large. Furthermore, an analytical model describing gas conversion is applied to the fuel reactor. It is shown that the model predicts the effect of variations in solids inventory well. Corrections to the model based on circulation, temperature and time of operation were assessed, but the effect was small under the present conditions. Data for the analysis are compiled from four operational periods, ranging from 2.4 h to 5.9 h of continuous fuel feeding. The oxygen carrier used was ilmenite, and the fuel a bituminous coal from Colombia.



Solid fuel

Oxygen demand

Gas conversion

Chemical-looping combustion


Pontus Markström

Chalmers, Energy and Environment, Energy Technology

Carl Johan Linderholm

Chalmers, Energy and Environment, Energy Technology

Anders Lyngfelt

Chalmers, Energy and Environment, Energy Technology

Chemical Engineering Sciences

0009-2509 (ISSN)

Vol. 96 131-141

Driving Forces

Sustainable development

Subject Categories

Energy Engineering

Areas of Advance



Basic sciences



More information