User's manual of the coupled CORE SIM neutronic and thermo-hydraulic tool
Report, 2014

This report presents how to use the coupled CORE SIM neutronic/thermo-hydraulic tool. The models and algorithms used in the coupled version of CORE SIM, as well as the demonstration of the tool were already presented in two companion reports. The novelty of the tool resides in its versatility, since many different systems can be investigated and different kinds of calculations can be performed. More precisely, both critical systems and subcritical systems with an external neutron source can be studied, static and dynamic cases in the frequency domain (i.e. for stationary fluctuations) can be considered. For each situation, the three dimensional distributions of static neutron fluxes, all thermo-hydraulic parameters, their respective first-order noise are estimated, as well as the effective multiplication factor of the system. The main advantages of the tool, which is entirely MATLAB based, lie with the robustness of the implemented numerical algorithms, its high portability between different computer platforms and operative systems, and finally its ease of use since no input deck writing is required. The present version of the tool, which is based on two-group diffusion theory, is mostly suited to investigate thermal systems, both Pressurized and Boiling Water Reactors (PWR and BWR, respectively). The tool is freely available on direct request to the authors of the present report.

core simulator

coupled neutronics/thermal-hydraulics

noise analysis

Author

Victor Dykin

Chalmers, Applied Physics, Nuclear Engineering

Christophe Demaziere

Chalmers, Applied Physics, Nuclear Engineering

Subject Categories

Other Engineering and Technologies

Other Physics Topics

Areas of Advance

Energy

CTH-NT - Chalmers University of Technology, Nuclear Engineering: 302

More information

Created

10/7/2017