Comparing Different PV Module Types and Brands Under Working Conditions in the United Kingdom
Book chapter, 2020

The present work demonstrates the performance evaluation and economic analysis of different PV module types and brands at the working conditions of Padiham (53.5 N, 2.3 W) in the UK. The total area of PV plant was assumed to be 100 square meters. The simulations were carried out for modules installed on the roof and on the south-facing façade of a residential building. The comparison study is carried out to define the most suitable module type and brands for the considered place in the current study. The energy and economic performance of the grid-connected PV system are analyzed under the meteorological conditions of Padiham. The modules were characterized by evaluating their annual electrical energy generation and different figures of merit of the grid-connected PV systems such as the investment, annual profit, net present value, levelized cost of electricity, and the payback time. The simulations show that in this specific setup, monocrystalline modules have the best energy performance, while thin-film modules have the best economic performance.

PV system

simulation

potential

different PV brands

Author

Mohamad Kharseh

Chalmers, Architecture and Civil Engineering, Building Technology

Holger Wallbaum

Chalmers, Architecture and Civil Engineering, Building Technology

Reliability and Ecological Aspects of Photovoltaic Modules

15-36

Demonstration of an integrated Renovation approach for Energy Efficiency At the Multi building scale (DREEAM)

European Commission (Horizon 2020), 2015-10-01 -- 2019-09-30.

Driving Forces

Sustainable development

Subject Categories

Energy Engineering

Energy Systems

Other Electrical Engineering, Electronic Engineering, Information Engineering

Areas of Advance

Energy

DOI

10.5772/intechopen.82613

More information

Created

2/19/2020