Improved mechanical properties of a Ti-48Al alloy processed by mechanical alloying and spark plasma sintering

Journal article, 2023

Bulk Ti-48Al alloy samples were prepared by the high energy ball milling (HBM) of elemental powders, followed by spark plasma sintering (SPS) of the HBM processed powders. The microstructure, phase evolution and mechanical properties of the bulk alloy were studied. The resulting TiAl + Ti3Al two phase alloy possessed an equiaxed fine grain structure, unlike the usual lamellar structure produced by arc melting. The process parameters of HBM and SPS, e.g., milling speed, milling time and sintering temperature were used to tune the phase fraction, microstructure, and grain size. A very high nanohardness of up to ∼12 GPa was obtained, ∼2.4 times higher than the corresponding value of the as-cast counterpart. The combined influence of powder size reduction during HBM, high Ti3Al phase fraction and microstructural development during SPS resulted in higher hardness, wear resistance and yield pressure. Thus, a HBM+SPS processing approach is a promising processing route for the manufacture of high hardness bulk TiAl alloys.