Low Al-content n-type AlxGa1-xN layers with a high-electron-mobility grown by hot-wall metalorganic chemical vapor deposition
Journal article, 2023

In this work, we demonstrate the capability of the hot-wall metalorganic chemical vapor deposition to deliver high-quality n-AlxGa1−xN (x = 0 – 0.12, [Si] = 1×1017 cm−3) epitaxial layers on 4H-SiC(0001). All layers are crack-free, with a very small root mean square roughness (0.13 – 0.25 nm), homogeneous distribution of Al over film thickness and a very low unintentional incorporation of oxygen at the detection limit of 5×1015 cm−3 and carbon of 2×1016 cm−3. Edge type dislocations in the layers gradually increase with increasing Al content while screw dislocations only raise for x above 0.077. The room temperature electron mobility of the n-AlxGa1−xN remain in the range of 400 – 470 cm2/(V.s) for Al contents between 0.05 and 0.077 resulting in comparable or higher Baliga figure of merit with respect to GaN, and hence demonstrating their suitability for implementation as drift layers in power device applications. Further increase in Al content is found to result in significant deterioration of the electrical properties.

AlGaN

GaN

MOCVD

Structural properties

Electrical properties

Author

Vallery Stanishev

Linköping University

Nerijus Armakavicius

Linköping University

Daniela Gogova

Linköping University

Muhammad Nawaz

Hitachi

Linköping University

Niklas Rorsman

Chalmers, Microtechnology and Nanoscience (MC2), Microwave Electronics

Plamen P. Paskov

Linköping University

Vanya Darakchieva

Linköping University

Lund University

Vacuum

0042-207X (ISSN)

Vol. 217 112481

Center for III Nitride semiconductor technology (C3NiT) fas2

VINNOVA (2022-03139), 2022-11-21 -- 2027-12-31.

III-nitrider med låg defekttäthet för grön kraftelektronik

Swedish Foundation for Strategic Research (SSF) (EM16-0024), 2018-01-16 -- 2022-12-31.

Subject Categories

Condensed Matter Physics

DOI

10.1016/j.vacuum.2023.112481

More information

Latest update

9/28/2023