RF Monte Carlo calculation of power amplifier efficiency as function of signal bandwidth
Journal article, 2016

We propose a definition of the efficiency bandwidth for a power amplifier (PA) using a modulated signal as the signal bandwidth at which the amplifier efficiency has dropped to a level of 90% of the maximum efficiency at small bandwidth. We introduce a Monte Carlo method to calculate the efficiency bandwidth for some popular PA architectures. The method assumes a given modulated signal at the load. From this load signal the wave forms at the drains of the transistors are derived and the energy dissipation in the transistors can be calculated. Using idealized transistors with no output capacitance the maximum realizable efficiency bandwidth of an asymmetrical Doherty amplifier is 60%, which is much larger than that of an outphasing amplifier, which is 14%. More realistic transistors that include output capacitances, need a matching circuit with a high Q-value which decreases the efficiency bandwidth. Using output capacitance values typical for LDMOS transistors, the asymmetrical Doherty amplifier shows an efficiency bandwidth of about 400MHz for a signal centered at 1GHz. For a signal at 2GHz the efficiency bandwidth is found to be 520MHz. Due to the fixed values of the output capacitances the efficiency bandwidth does not scale with frequency.

Power amplifiers and linearizers

Linear and nonlinear CAD Techniques

Author

Hendrikus Jos

Chalmers, Microtechnology and Nanoscience (MC2), Microwave Electronics

International Journal of Microwave and Wireless Technologies

1759-0787 (ISSN) 1759-0795 (eISSN)

Vol. 8 2 125-133

Subject Categories

Electrical Engineering, Electronic Engineering, Information Engineering

DOI

10.1017/s175907871500015x

More information

Created

10/7/2017