The theory of acoustic sensors application in air quality control
Journal article, 2018

Acoustic sensors based on piezoelectric resonators are widely used in the real-time monitoring of mass and in situ analysis of air composition, for example in environmental, health care and air quality control (AQC) applications, both indoor and outdoor. Recent advances in the QCM techniques include the possibility of measuring changes in resonance frequency, Delta f, and the dissipation, Delta D (so-called QCM-D sensors). Another field of application is measurements of different overtones, which can provide additional information about the system. The sensing layers in QCM devices are often polymer-or supported membrane-based, both of which are soft (viscoelastic) materials. Viscoelasticity of adsorbed layers must thus be taken into account for adequate interpretation of QCM data. This publication describes theoretical results, including analytical formulae for the resonance frequency shift and the dissipation of QCM-D, for two viscoelastic layers deposited onto resonator surface, as well as calculations for higher harmonics. In particular, the corrections in Delta f and Delta D due to the softness of the top layer, considered as a bulk, are written explicitly in terms of the layer's material parameters. The results can be useful for quantitative analysis of measured characteristics of QCM in AQC, environmental monitoring and biosensor applications.

Air quality control

Theoretical modeling

Complex fluids

QCM-D

Author

Marina Voinova

Chalmers, Physics, Condensed Matter Theory

Urban Climate

2212-0955 (ISSN)

Vol. 24 264-275

Subject Categories

Medical Laboratory and Measurements Technologies

Textile, Rubber and Polymeric Materials

Other Electrical Engineering, Electronic Engineering, Information Engineering

DOI

10.1016/j.uclim.2018.04.002

More information

Latest update

4/2/2022 1