Dye sensitized solar cells with poly(acrylonitrile) based plasticized electrolyte containing Mgl(2)
Artikel i vetenskaplig tidskrift, 2010

Polymer electrolytes can be used favorably in photo-electrochemical solar cells. A possible electrolyte for this purpose is a polyacrylonitrile-Mgl(2) complex with plasticizers such as ethylene carbonate and propylene carbonate The best ionic conductivity was obtained for samples containing 60 wt% of Mgl(2) salt with respect to the weight of polyacrylonitrile, for example, at 30 degrees C the conductivity is 1.9 x 10(-3) S cm(-1) The ionic contribution to the conductivity is dominant as shown by do polarization tests. Furthermore, the glass transition temperature showed a minimum, -103.0 degrees C. for the sample with the highest conductivity indicating the importance of polymer chain flexibility for the conduction process Measurements on a fabricated solar cell with this electrolyte exhibited an overall energy conversion efficiency of 0.84%. The short circuit current density, open circuit voltage and fill factor of the cell were 2 04 mA cm(-2), 692 mV and 59.3%, respectively.

Författare

T M W J Bandara

Chalmers, Teknisk fysik, Fasta tillståndets fysik

MAKL Dissanayake

University of Peradeniya

Bengt-Erik Mellander

Chalmers, Teknisk fysik, Fasta tillståndets fysik

Electrochimica Acta

0013-4686 (ISSN)

Vol. 55 6 2044-2047

Ämneskategorier

Den kondenserade materiens fysik

DOI

10.1016/j.electacta.2009.11.031