Effect of periodic lean/rich switch on methane conversion over a Pd/Rh-based three way catalyst in the exhausts of natural gas vehicles
Artikel i vetenskaplig tidskrift, 2012
The behavior of a commercial Ce–Zr promoted Pd-Rh/Al2O3 catalyst for the abatement of methane from the exhausts of natural gas vehicles (NGVs) is studied in presence of large amounts of water under both stationary conditions and by periodically switching from lean to rich feed. Under stationary conditions with both stoichiometric (λ = 1.00) and lean (λ = 1.02) feed catalyst deactivation is observed after prolonged exposure to the reaction mixture. Periodic rich pulses in a constant lean feed gas result in the stabilization of catalytic performances.
A higher methane conversion than those obtained with stoichiometric and lean feed mixtures is observed under rich conditions, during an experiment carried out by performing lean pulses (λ = 1.02) in a constant rich feed gas (λ = 0.98). The analysis of reactants conversion and products distribution suggests that different chemistries are involved under lean and rich conditions. Only reactions of complete oxidation of H2, CO, CH4 and NO occur under excess of oxygen, whereas under rich conditions NO reduction, CH4 steam reforming and water gas shift also occur.
The effect of symmetric oscillation of the exhausts composition around stoichiometry is also addressed by periodically switching from slightly rich to slightly lean composition with different oscillation amplitudes (Δλ = ±0.01, ±0.02 and ±0.03). Higher and more stable methane conversion performances are obtained than those observed under constant λ operations. The presence of a more active PdO/Pd0 state is suggested to explain the enhancement of catalytic performances.
Methane oxidation
Natural gas vehicle
Periodic operation
Pd/Rh-based catalyst