Influence of temperature on ionic liquid-based gel polymer electrolyte prepared by electrospun fibrous membrane
Artikel i vetenskaplig tidskrift, 2014
Ionic liquid gel polymer electrolytes (ILPEs) based on electrospun P(VdF-HFP) membrane were prepared by incorporating RTILs, BMImTESI or BMImBF(4). A suitable BMIm cation based ionic liquid with lithium salt and influence of temperature on electrochemical performance was investigated. The BMImTFSI-based polymer electrolyte with LiTFSI salt showed better electrochemical properties and the properties increase with increasing the operation temperature to 40 degrees C, to 140 mAh g(-1) discharge capacity at 1 C-rate. However, after 40 degrees C the properties remained the same even when the temperature was increased at high current density.
POLY(VINYLIDENE FLUORIDE-CO-HEXAFLUOROPROPYLENE)
TRANSPORT-PROPERTIES
SOLID ELECTROLYTES
COMPOSITE
LITHIUM BATTERIES
Ionic liquid electrolyte
LIFEPO4 CATHODE
Electrospun membrane
BIS(TRIFLUOROMETHANESULFONYL)IMIDE
Gel polymer electrolyte
PAN
Ion coordination
ELECTROCHEMICAL PROPERTIES
Electrochemical performance
CONDUCTIVITY
Författare
Jae-Kwang Kim
Ulsan National Institute of Science and Technology (UNIST)
Chalmers, Teknisk fysik, Kondenserade materiens fysik
J. H. Ahn
Gyeongsang National University
Per Jacobsson
Chalmers, Teknisk fysik, Kondenserade materiens fysik
Electrochimica Acta
0013-4686 (ISSN)
Vol. 116 321-325Ämneskategorier
Fysik
DOI
10.1016/j.electacta.2013.11.061