Numerical calibration and experimental validation of a PCM-Air heat exchanger model
Artikel i vetenskaplig tidskrift, 2017

© 2016 Elsevier Ltd Ambitious goals have been set at international, European and French level for energy consumption and greenhouse gas emissions decrease of the building sector. Achieving them requires renewable energy integration, a technology that presents however an important drawback: intermittent energy production. In response, thermal energy storage (TES) technology applications have been developed in order to correlate energy production and consumption of the building. Phase Change Materials (PCMs) have been widely used in TES applications as they offer a high storage density and adequate phase change temperature range. It is important to accurately know the thermophysical properties of the PCM, both for experimental (system design) and numerical (correct prediction) purposes. In this paper, the fabrication of a PCM – Air experimental prototype is presented at first, along with the development of a numerical model simulating the downstream temperature evolution of the heat exchanger. Particular focus is given to the calibration method and the validation of the model using experimental characterization results. Differential scanning calorimetry (DSC) is used to define the thermal properties of the PCM. Initial numerical results are underestimated compared to experimental ones. Various factors were investigated, pointing to the ineptitude of the heat capacity parameter, as DSC results depend on heating/cooling rates. Adequate heat capacity curves were empirically determined, depending on heat transfer rates and based on DSC results and experimental observations. The results of the proposed model are confronted with experimental characterization data at different points of the unit and for various airflow rates. A good agreement is observed, showing an average difference ranging from 0.53 °C to 0.75 °C for the surface and PCM values and from 0.87 °C to 1.2 °C for the outlet air temperature values.

Heat exchanger prototype

DSC

Numerical model

Thermal storage

Validation

PCM

Load shifting

Calibration

Författare

Nikolaos Stathopoulos

Ecole Nationale des Travaux Publics de l'Etat

Mohamed El Mankibi

Ecole Nationale des Travaux Publics de l'Etat

Mattheos Santamouris

University of New South Wales (UNSW)

Applied Thermal Engineering

1359-4311 (ISSN)

Vol. 114 1064-1072

Drivkrafter

Hållbar utveckling

Styrkeområden

Energi

Ämneskategorier

Energisystem

DOI

10.1016/j.applthermaleng.2016.12.045

Mer information

Senast uppdaterat

2018-01-29