Two-dimensional measurements of soot in a turbulent diffusion diesel flame: the effects of injection pressure, nozzle orifice diameter, and gas density
Artikel i vetenskaplig tidskrift, 2018

Two-dimensional light extinction, flame luminosity, and OH* chemiluminescence images were captured at a constant ambient temperature of 823K and two gas densities (20 and 26kg/m(3)), with injection pressures of 800-2500 bar using nozzle orifices with diameters of 0.19 and 0.10mm. Soot volume fraction and OH distribution images were obtained using the Abel inversion method, and the local equivalence ratio in the lift-off length region was predicted. The results show that the equivalence ratio along the jet's center at the lift-off length was found to play a critical role in soot formation. Reductions in thickened the OH zone in the upstream region of the jet, reducing the volume corresponding to the maximum soot volume fraction. The expansion of the OH zone also helped reduce the sooting zone's width. Under high sooting conditions (e.g.,, the sooting zone width in the downstream jet was independent of phi(CL).

Diesel spray

Soot formation and oxidation

OH* Chemiluminescence

Laser extinction

Local equivalence ratio

Författare

Chengjun Du

Chalmers, Mekanik och maritima vetenskaper, Förbränning

Sven B Andersson

Chalmers, Mekanik och maritima vetenskaper, Förbränning

Mats Andersson

Chalmers, Mekanik och maritima vetenskaper, Förbränning

Combustion Science and Technology

0010-2202 (ISSN) 1563-521X (eISSN)

Vol. 190 9 1659-1688

Ämneskategorier

Astronomi, astrofysik och kosmologi

Atom- och molekylfysik och optik

Geofysik

DOI

10.1080/00102202.2018.1461850

Mer information

Senast uppdaterat

2018-08-21