Surface Potential Decay on LDPE and its Nanocomposites
Paper i proceeding, 2018

To elucidate capabilities of nanocomposites in a full extend, deep understanding of various physical processes induced by electric fields in the bulk and on surfaces of the materials is needed. This paper reports an investigation of surface potential decay on low-density polyethylene and its mixtures with Al2O3 and MgO nanofillers. Samples of two groups materials with various thicknesses prepeared using different manufacturing processes were used in the study. The samples were pre-charged by negative corona and surface potentials were measured by a non-contact technique at room temperature. The obtained results showed that the addition of nanofillers remarkably slowed down the potential decay process irrespectively of film thicknesses and fabrication processes. This is attributed to the significantly lower conductivities of LDPE nanocomposites as compared to pure material. Moreover, the conductivities of the filled materials exhibited strong electric field dependences. It is postulated that the effect can be related to the increased trap energy in the nanocomposites.

nano-composite

Surface potential decay

trap energy

electric conductivity

Författare

Xiangrong Chen

Zhejiang University

Anh T. Hoang

Student vid Chalmers

Yuriy Serdyuk

Chalmers, Elektroteknik, Elkraftteknik

Stanislaw Gubanski

Chalmers, Elektroteknik, Elkraftteknik

Proceedings of IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP)

485-488

Styrkeområden

Energi

Ämneskategorier

Nanoteknik

Kompositmaterial och -teknik

Annan elektroteknik och elektronik

DOI

10.1109/CEIDP.2017.8257575

Mer information

Senast uppdaterat

2020-03-05