Measurement of the thermal cycle in the base metal heat affected zone of cast ATI®718PlusTM during manual multi-pass TIG welding
Paper i proceeding, 2018

This paper presents a method to acquire thermal data in the base metal heat affected zone (HAZ) during manual multi-pass TIG welding of ATI®718PlusTM, representing conditions close to an actual repair welding operation. Thermocouples were mounted in different locations along side walls of linear grooves to record temperature data. The thermal cycling was found to be largely independent of location within the HAZ. The recorded temperatures were below the incipient laves melting temperature, indicating that the current test setup requires optimisation to study HAZ liquation. Based on the results of this study, a modified thermocouple mounting technique is proposed.

Nickel-based superalloys

Temperature measurement

Welding

Författare

Fabian Hanning

Chalmers, Industri- och materialvetenskap, Material och tillverkning

Joel Håkan Andersson

Chalmers, Industri- och materialvetenskap, Material och tillverkning

Högskolan Väst

Kjell Hurtig

Högskolan Väst

Procedia Manufacturing

2351-9789 (eISSN)

Vol. 25 443-449

The 8th Swedish Production Symposium (SPS2018)
Stockholm, Sweden,

Ämneskategorier

Bearbetnings-, yt- och fogningsteknik

Annan materialteknik

Metallurgi och metalliska material

Styrkeområden

Materialvetenskap

DOI

10.1016/j.promfg.2018.06.115

Mer information

Senast uppdaterat

2023-03-21