An Unequal Power Divider Based on Ridge Gap Waveguide
Paper i proceeding, 2019

This paper proposes a novel unequal power divider based on the ridge gap waveguide technology. Different from the conventional T-junction power divider, the unequal power divider is realized by using a half-height pin structure with an inserted conductor plane. The conductor plane is printed on a thin substrate for the mechanical feasibility. The power division ratio can be controlled by the position of the inserted conductor plane. In this paper, a 1:2 power divider is designed to verify this topology. The reflection coefficient is below -20 dB from 26 GHz to 32 GHz with 20.7% impedance bandwidth and the amplitude discrepancy between the two output ports is about 2.92 dB. Meanwhile, the maximum value of the phase difference is below 12 degrees.

ridge gap wavegudie

inserted conductor plane

unequal power divider

half-height pin

Författare

Yu Quan

Chalmers, Elektroteknik, Kommunikations- och antennsystem, Antennsystem

Jian Yang

Nanjing University of Science and Technology

Chalmers, Elektroteknik, Kommunikations- och antennsystem, Antennsystem

Hao Wang

Nanjing University of Science and Technology

Ashraf Uz Zaman

Chalmers, Elektroteknik, Kommunikations- och antennsystem, Antennsystem

Proceedings of the European Conference on Antennas and Propagation

2164-3342 (ISSN)

13th European Conference on Antennas and Propagation (EuCAP)
Krakow, Poland,

Ämneskategorier

Telekommunikation

Energiteknik

Annan elektroteknik och elektronik

Mer information

Senast uppdaterat

2019-09-11