Responsivity and noise equivalent power of a single cold-electron bolometer
Artikel i vetenskaplig tidskrift, 2021

We have developed a single-pixel capacitively coupled Cold-Electron Bolometer (CEB) and characterized it in the current-biased regime. The most attractive feature of the CEB is effective electron self-cooling of the absorber, which leads to a lower bolometer noise and higher dynamic range. The bolometer responsivity was measured by determining the voltage response to an applied power through the absorber from a heating current, modulated at frequencies from 35 Hz to 2 kHz. The optimum responsivity of 1.5 × 10 V/W was measured at a modulation frequency of 35 Hz. The noise equivalent power (NEP) was subsequently obtained from the estimated bolometer noise voltage with respect to the measured bolometer responsivity. The NEP of better 2 × 10 W/Hz was obtained for modulation frequencies greater than 100 Hz. The background power and the bolometer time constant were also estimated from the experimental results. The photon-noise-limited operation of CEB will dominate for a signal power of 10 fW and higher at frequency 80 GHz and higher. 10 −18 1/2

Responsivity

CEB

Bolometer

Cold-electron bolometer

Noise equivalent power

Författare

Ian Jasper Agulo

University of the Philippines Baguio

Leonid Kuzmin

Chalmers, Mikroteknologi och nanovetenskap (MC2), Kvantkomponentfysik

Nizhny Novgorod State Technical University

Applied Sciences (Switzerland)

20763417 (eISSN)

Vol. 11 10 4608

Ämneskategorier

Annan fysik

Signalbehandling

Annan elektroteknik och elektronik

DOI

10.3390/app11104608

Mer information

Senast uppdaterat

2021-06-17