Performance improvement of variable-angle annular thermoelectric generators considering different boundary conditions
Artikel i vetenskaplig tidskrift, 2022

Practical applications of thermoelectric generators are impeded by their low thermoelectric conversion efficiency, and improving the efficiency is vital for the advancements of thermoelectric technology. In this paper, a novel method is proposed for the performance analysis and improvement of the annular thermoelectric generators with variable-angle PN legs (VATEGs). The influence of the PN leg angle on the output performance of the VATEG is investigated by introducing an angle function. Given the volume of the PN legs, the relationship of output performance between the VATEG and traditional constant-angle ATEG (CATEG) is established under different boundary conditions based on a proposed generic model of VATEG. The results are verified numerically using the finite element method. Using the model, it is shown that the output performance of the VATEG is significantly affected by the shape of the PN leg. Finally, the thermal stress on the PN leg is next investigated using a high-fidelity 3D model of the variable-angle PN legs implemented in COMSOL, and it is found that the shape difference has a considerable influence on the thermal stability of VATEG. Under the condition of constant heat flux on the hot side and constant temperature on the cold side of the thermoelectric modules, it shows that when the radius factor is 2, the output performance can be improved by 35% with the designed VATEG, at the expense of 30% higher maximum thermal stress on the PN legs.

Heat recovery

Shape factor

Variable-angle annular thermoelectric generator (VATEG)

Energy efficiency

Finite element method

Thermal stress

Författare

Zebin Weng

Wuhan University of Technology

Furong Liu

Wuhan University of Technology

Wenchao Zhu

Wuhan University of Technology

Yang Li

Chalmers, Elektroteknik, System- och reglerteknik, Reglerteknik

Wuhan University of Technology

Changjun Xie

Wuhan University of Technology

Jian Deng

Wuhan University of Technology

Liang Huang

Wuhan University of Technology

Applied Energy

0306-2619 (ISSN)

Vol. 306 118005

Ämneskategorier

Rymd- och flygteknik

Teknisk mekanik

Energiteknik

DOI

10.1016/j.apenergy.2021.118005

Mer information

Senast uppdaterat

2021-10-25