Change of existing circulating fluidized bed boilers to oxy-firing conditions for CO2 capture
Artikel i vetenskaplig tidskrift, 2021

This work investigates a circulating fluidized bed boiler, originally designed for air-firing, retrofitted to oxy-firing with the purpose of removing the CO2 emission from coal combustion. Previous studies have shown that the heat balance on the gas-particle side can be satisfied without changes in the boiler, but then the volume flow of gas is reduced. To retain the operation like that during air-firing, the volume flow, that is the fluidization velocity, in oxy-firing should be equal to that in air-firing. It is the main purpose of this work to determine the conditions for the transition from air to oxy-firing, while the heat transfer conditions are maintained at a constant fluidization velocity. Measures to achieve this, such as adjusting the supply of additional gas and the heat transfer surface, are analysed. The fulfilment of the furnace's heat balance requires extra fuel or reduction of the heat-transfer surface in the furnace. These changes affect the performance of the back pass, which must be modified to accommodate the change in gas composition and the higher sensible heat content of the flue gas. Strategies to deal with these circumstances in CFB boilers are discussed.

Circulating fluidized bed

CO reduction 2

Coal

Boiler

Oxy-combustion

Carbon capture

Författare

Bo G Leckner

Chalmers, Rymd-, geo- och miljövetenskap, Energiteknik

Alberto Gómez-Barea

Universidad de Sevilla

Applications in Energy and Combustion Science

2666352X (eISSN)

Vol. 8 100042

Ämneskategorier

Energiteknik

Kemiska processer

Bioenergi

DOI

10.1016/j.jaecs.2021.100042

Mer information

Senast uppdaterat

2022-06-12