Biocomposite PBAT/lignin blown films with enhanced photo-stability

Artikel i vetenskaplig tidskrift, 2022

Lignin can be obtained as a byproduct during cellulose-rich pulp fibers production and it is habitually treated as waste or intended for low-value destinations. However, due to UV absorption and mechanical properties, lignin can contribute to the fabrication of biodegradable blown films with superior performances. In this study, it was established the suitability of lignin for manufacturing biocomposite PBAT blown films with higher stiffness and photo-oxidation resistance. The effect of the filler concentration on the melt rheological behavior in non-isothermal elongational flow was investigated. The results allowed us to choose the correct filler concentration for producing films through a film blowing operation. The PBAT/lignin blown film composites displayed an increase of the elastic modulus if compared to neat PBAT films without affecting their elongation at break. Furthermore, the filler delayed the photo-oxidative degradation of PBAT hence potentially allowing open-air applications.