Iron based oxygen-carrier-aided oxy-fuel combustion of coal char: Reactivity and oxygen transfer mechanism

Artikel i vetenskaplig tidskrift, 2023

Adding an active oxygen carrier to the inert bed material may favor the oxygen distribution in fluidized bed (FB) combustors. This so-called method “Oxygen-carrier-aided combustion, OCAC” has been applied recently to air combustion in FB boilers, but could also be potentially interesting in oxy-fuel combustion. Here we analyze OCAC in oxy-fuel combustion by experimental determination of the reactivity of char from three coals (lignite, bituminous and anthracite coal) using three oxygen carriers (OC, analytical reagent Fe2O3, hematite, and steel slag). The tests were conducted in a micro thermo-gravimetric analyzer (micro-TGA) and the combustion kinetics was determined for the nine combinations of char and OC. Additional tests were conducted in a macro-TGA i.e., much sample in a big ceramic crucible, to evaluate the phase composition and crystal quality using X-ray diffraction (XRD) to the combustion residues collected at various degrees of carbon conversion (0.2, 0.5, and 0.8). The results show that the burnout temperature decreases with OCs as the combustion rate increases, while the ignition temperature hardly changes. The enhancement of the rate of char combustion by OCs is in the following order: steel slag < hematite < AR-Fe2O3. The lower the fuel rank, the stronger the effect of the oxygen carrier. The combustion kinetics of chars using OC has a higher activation energy and pre-exponential factor than pure char. The enlarged lattice constant of Fe2O3 measured by XRD during the char combustion indicates that the redox reactions of Fe2O3 accelerate the oxidization of char by enhancing the rate of oxygen transport to the carbon surface.