A novel L12-strengthened AlCoCuFeNi high-entropy alloy with both high hardness and good corrosion resistance
Artikel i vetenskaplig tidskrift, 2023

In this work, a high hardness, crack-free AlCoCuFeNi high-entropy alloy with good corrosion resistance was successfully produced by spark plasma sintering at 1000℃ and 30 MPa for 10 min, followed by hot rolling to a thickness reduction of 10 % after holding at 600℃ for 30 min. The microstructure of the alloy was composed of fine equiaxed grains of (Fe, Co, Ni, Al)-enriched BCC, Cu-enriched FCC, nano-sized L12, and Al2O3 phases. The maximum texture index of the material is only 1.53, indicating a low anisotropy. The alloy possessed a high hardness (599 HV), a low friction coefficient (0.1), and a low corrosion current density (1.13 μA/cm2), implying both good wear and corrosion resistance. In addition, the creep mechanism was found to be grain boundary sliding.

Segregation

Corrosion resistance

High entropy alloy

Nanomechanics

Microstructure

Författare

Yaojia Ren

Central South University

Hong Wu

Central South University

Bin Liu

Central South University

Quan Shan

Kunming University of Science and Technology

Sheng Guo

Chalmers, Industri- och materialvetenskap, Material och tillverkning

Z. B. Jiao

Hong Kong Polytechnic University

Ian Baker

Thayer School of Engineering at Dartmouth

Materials Letters

0167-577X (ISSN) 18734979 (eISSN)

Vol. 331 133339

Ämneskategorier

Keramteknik

Bearbetnings-, yt- och fogningsteknik

Korrosionsteknik

DOI

10.1016/j.matlet.2022.133339

Mer information

Senast uppdaterat

2022-11-22