Shear and torsion in prestressed hollow core units:finite element analyses of full-scale tests

Artikel i vetenskaplig tidskrift, 2007

The present calculation methods for shear and torsion in prestressed hollow core slabs add stresses from various influences without taking into account deformations and compatibility, the softening of cracking concrete, or restraint at the boundaries, therefore they are most likely conservative. The main purpose of this work is to establish three-dimensional finite element models, which can be used both to analyse the effect of parameters that influence the shear and torsion response and to be included in global models of complete floors. An important aspect was therefore to simplify the models to avoid time-consuming analyses. Coarse meshes with solid elements were combined with beam elements. The established models were validated by simulating a series of full-scale tests conducted on both 200 mm and 400 mm thick hollow core units subjected to various combinations of shear and torsion. In general, although very coarse meshes were used, the finite element analyses of the tests succeeded in describing the overall behaviour, crack pattern, failure mode, and maximum load, with a reasonably good agreement.