Physical simulation of low temperature phase separation during multipass welding of super duplex stainless steel
Artikel i vetenskaplig tidskrift, 2024

This study aimed to investigate the degree of low-temperature phase separations and 475 °C -embrittlement in physically simulated multipass super duplex stainless steel (SDSS) welds. A single bead weld was produced using gas metal arc welding and multiple thermal cycles with different peak temperatures were applied using a Gleeble physical simulator with fixed and moving jaws to simulate the influence of constrained designs, to mimic the welding of thick SDSS components. The samples were studied using atom probe tomography and the results were correlated with toughness and ferrite microhardness. The results showed that the microhardness of the ferrite in the constrained simulated multipass reheated weld increased from 304 HV to 374 HV after 5 min aging at 475 °C. The amplitude of the Cr concentration of the same sample, showing the level of Fe-Cr phase separation, increased from 1.025 to 1.045 after 5 min aging at 475 °C. Despite the clear development of phase separation in the ferrite, the toughness did not drop. It can be concluded that reheated SDSS welds are not susceptible to 475 °C -embrittlement during short fabrication times of up to 5 min for the austenite level of 50%.

super duplex stainless steel

multipass welding

spinodal decomposition

475 °C -embrittlement

Författare

Vahid A. Hosseini

ESAB

Mattias Thuvander

Chalmers, Fysik, Mikrostrukturfysik

Welding International

0950-7116 (ISSN) 1754-2138 (eISSN)

Vol. 38 4 290-297

Ämneskategorier

Fysikalisk kemi

Bearbetnings-, yt- och fogningsteknik

Metallurgi och metalliska material

DOI

10.1080/09507116.2024.2329713

Mer information

Senast uppdaterat

2024-04-13