Infrared thermography investigation of heat transfer on outlet guide vanes in an engine exit module
Paper i proceeding, 2019

This paper presents experimental results of heat transfer coefficient on an outlet guide vane (OGV) in an engine exit Module (EEM) at engine-representative conditions. The results were obtained in Chalmers OGV-LPT test facility with a newly developed method to measure heat transfer with high accuracy that is applicable to a large variety of geometries. A thin-walled OGV was manufactured with an internal water heating system and surface temperature was measured by IR thermography. An extensive effort has been made to mitigate all major sources of uncertainty and results from three different load cases at Reynolds number 235000 is presented. The current study is closing the gap which previously existed in the literature by providing data on heat transfer on EES OGVs under engine representative conditions. These results are crucial for designing future high-bypass ratio aero-engines which is a new radical concept requiring improvement of the existing design of EEMs.

Författare

Isak Jonsson

Chalmers, Mekanik och maritima vetenskaper, Strömningslära

Valery Chernoray

Chalmers, Mekanik och maritima vetenskaper, Strömningslära

Radheesh Dhanasegaran

Lappeenrannan-Lahden teknillinen yliopisto (LUT)

13th European Turbomachinery Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2019

13th European Turbomachinery Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2019
Lausanne, Switzerland,

Ämneskategorier

Annan maskinteknik

Rymd- och flygteknik

Energiteknik

Infrastruktur

Chalmers strömningslaboratorium

Mer information

Senast uppdaterat

2024-07-30