Opening Letter of RILEM TC UMW: Upcycling Powder Mineral Wastes into Cement Matrices — Challenges and Opportunities
Artikel i vetenskaplig tidskrift, 2025

The cement and concrete industries are currently facing the urgent and arduous challenge of decarbonisation and material circularisation for improved resource efficiency. The pursuit of new raw materials and binders that will improve sustainability is urgent, especially as end-of-pipe carbon capture and storage (CCS) technologies have not yet been scaled up economically even after five decades of research and large investments. On the other hand, society is facing the colossal issue of managing mineral wastes which are produced in several Gts per year globally, posing a massive environmental and societal liability. Many of these mineral wastes have elemental and mineralogical profiles that make them good candidates for use as clinker raw feed or supplementary cementitious materials. Although the published research on the topic is extensive, it is not organised, lacking a systematic comprehensive approach, making valorisation challenging. RILEM TC UMW was developed to address this gap and create a framework for realising the potential of upcycling mineral wastes focusing on using powders as either clinker raw feed or other binder applications while excluding discussion on calcined clays and mineral carbonation.

Mineral waste

Low-carbon clinkers

Supplementary cementitious materials

Alkali-activated materials

Upcycling

Författare

Arne Peys

Vlaamse Instelling voor Technologisch Onderzoek (VITO)

Luca Valentini

Università di Padova

Aniruddha Baral

University of Leeds

Arezou Baba Ahmadi

Chalmers, Arkitektur och samhällsbyggnadsteknik, Byggnadsteknologi

Priyadharshini Perumal

Oulun Yliopisto

C2CA Technologies

Marco Davolio

Politecnico di Milano

Liberato Ferrara

Politecnico di Milano

Antonios Kanellopoulos

University of Hertfordshire

Theodore Hanein

earth4Earth Technology Limited

University of Leeds

RILEM Technical Letters

25180231 (eISSN)

Vol. 10 33-43

En avgörande övergång till användning av cementersättningsmaterial: Ett heuristiskt tillvägagångssätt för att identifiera drivkrafter och hinder och föreslå potentiella lösningar (SCM-Force-II).

Formas (2022-01981), 2022-01-01 -- 2022-12-31.

Ämneskategorier (SSIF 2025)

Metallurgi och metalliska material

Miljöteknik och miljöledning

Drivkrafter

Hållbar utveckling

Innovation och entreprenörskap

DOI

10.21809/rilemtechlett.2025.210

Mer information

Senast uppdaterat

2025-06-26